Zenmuse Z15 Bedienungsanleitung PDF herunterladen (Seite 25)

©

2014 DJI. All Rights Reserved.

25

Zenmuse Z15-BMPCC

User Manual

Trouble Shooting

NO. What Why How to

1

The gimbal keeps drifting

after initialization.

(1) The TX trims are too high.

(2) The GCU and Flight

Control System have been

disconnected.

(3) The gimbal mounting

direction is not pointing

towards the aircraft’s nose.

(1) Adjust the TX trims.

(2)

Connect the GCU and Flight

Control System.

(3)

Ensure the gimbal mounting

direction is the same with

aircraft’s nose.

2

The gimbal is abnormal after

initializing.

Abnormal calibration after

manufacturing.

Please contact the local dealer or

DJI customer service.

3

Cannot distinguish the

gimbal’s direction when in

use.

BVR (Beyond Visibility Range)

ight.

Switch to the FPV Mode rst, then to

another Working Mode as needed.

4

The gimbal LED is blinking

red.

(1) There is a disconnection

between the gimbal and

camera.

(2) Camera is off.

(3) Camera setup failure.

(1) Make sure the cables are

securely connected.

(2) Power on the camera.

(3) Set the HDMI resolution to 1080i.

5

The gimbal’s green or yellow

LED is solid on but no video

displayed.

(1) HDMI-HD/AV transmission

module is disconnected from

camera.

(2) The camera is power off.

(3) HD mode, DJI Lightbridge APP

video source has been set to

“HDMI/AV”.

(1

) Check HDMI-HD/AV transmission

module connection.

(2) Power on the camera.

(3) Change the DJI Lightbridge App

video source to "HD Gimbal".

Appendix

1 2 ... 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare