Zenmuse Z15 Bedienungsanleitung PDF herunterladen (Seite 17)

Zenmuse Z15-BMPCC

User Manual

Orientation-locked

MODE channel end-point 60%~90%

FPV (Reset) back to center

Non orientation-locked MODE channel end-point 60%~90%

The gimbal will work in Orientation-locked mode, if not connected to MODE channel.

FPV mode is default.

The Working Mode from the previous power cycle will be retained if the cable between MODE

and RC receiver is disconnected during operation.

For a 3-position switch, you may assign:

Position-1 to Non orientation-locked

2-Positon

Switch

3-Positon

Switch

3-Positon

Switch

Position-2 to FPV Mode (Reset)

Position-3 to Orientation-locked

Position-1 and Position-3 can be inversely assigned.

One 2-position switch can be assigned for any two of the working modes as preferred.

AUX1 Switch Settings

This product supports remote aperture adjustments. Connect the correct channel of receiver to

AUX1 port. Assign: Position-1 to Add; Position-3 to Reduce; or reverse.

One of the two switch positions (Position-1) is to add camera aperture and the other (Position-3) is

to reduce camera aperture.

Toggling the switch will do the following.

Position-2

Position -1: Increase aperture

2-Positon

Switch

3-Positon

Switch

3-Positon

Switch

Position-2

Position -3: Decrease aperture

AUX2 Switch Settings

The Z15-BMPCC supports two camera positions in Reset Mode, straight down and forward.

Connect the correct receiver channel to AUX2 port. Assign: Position-1 to DOWN; Position-2 to

FORWARD; or the opposite.

2-Positon

Switch

3-Positon

Switch

3-Positon

Switch

This function will only work in FPV mode (Reset).

If the working mode is switched to FPV (Reset) when this is activated, the camera lens will

move to face forward or down depending on the AUX2 Switch.

Camera orientation defaults to facing forward if disconnected during use.

When the AUX2 port is connected to a S-Bus channel, it is used as a S-Bus channel input.

Working Modes/AUX1/AUX2 Switch Settings

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Zenmuse Z15 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Brückenkameras Zenmuse Z15